Your Shopping cart is empty.

Ohitus pääsisältöön »

Äänisoittimet

8 tuote(tta)

/ sivu

Listana  Taulukkona 

Laskeva
  1. Adafruit Audio FX Sound Board - WAV/OGG Trigger with 16MB Flash

    Adafruit Audio FX Sound Board - WAV/OGG Trigger with 16MB Flash

    26,00 €

    Loppu varastosta

    ‌Small audio player for embedded projects.

    Lue lisää...
  2. Teensy Audio Board

    Teensy Audio Board

    17,50 €

    ‌‌This is the Teensy Audio board add-on for the Teensy 3.0 and 3.1 development boards. This audio board provides you with an easy-to-use tool to add high quality 16 bit, 44.1 kHz sample rate audio to your Teensy project. 

    Lue lisää...
  3. WAV Trigger

    WAV Trigger

    49,95 €

    The WAV Trigger is an audio development platform that allows you to easily add music and sound effects to your project. The WAV Trigger plays uncompressed WAV files up to 16-bit stereo 44.1kHz, the same quality as audio CD’s. One significant feature is that the board has the ability to play multiple tracks at the same time, mixing up to 8 stereo tracks together on the fly. The board has an audio jack for use with headphones or speakers and a 2 pin output that can be connected to a speaker for audio output.

    Lue lisää...
  4. MP3 Trigger v2

    MP3 Trigger v2

    45,00 €

    A very versatile, low-cost, low power embedded MP3 Player. The board has 18 external trigger pins that will directly trigger pre-selected MP3 tracks, and a full-duplex serial control port that provides full transport control, remote triggering for up to 256 tracks, and fast real-time volume control.

    Lue lisää...
  5. VS1053 Codec + MicroSD Breakout - MP3/WAV/MIDI/OGG Play + Record

    VS1053 Codec + MicroSD Breakout - MP3/WAV/MIDI/OGG Play + Record

    25,00 €

    Loppu varastosta

    This breakout board is the ultimate companion for the VLSI VS1053B DSP codec chip. The VS1053 can decode a wide variety of audio formats such as MP3, AAC, Ogg Vorbis, WMA, MIDI, FLAC, WAV (PCM and ADPCM). It can also be used to record audio in both PCM (WAV) and compressed Ogg Vorbis. You can do all sorts of stuff with the audio as well such as adjusting bass, treble, and volume digitally. There is also 8 GPIO pins that can be used for stuff like lighting up small LEDs or reading buttons.

    Lue lisää...
  6. Adafruit "Music Maker" MP3 Shield for Arduino (MP3/Ogg/WAV...)

    Adafruit "Music Maker" MP3 Shield for Arduino (MP3/Ogg/WAV...)

    29,95 €

    Bend all audio files to your will with the Adafruit Music Maker shield for Arduino! This powerful shield features the VS1053, an encoding/decoding (codec) chip that can decode a wide variety of audio formats such as MP3, AAC, Ogg Vorbis, WMA, MIDI, FLAC, WAV (PCM and ADPCM). It can also be used to record audio in both PCM (WAV) and compressed Ogg Vorbis. You can do all sorts of stuff with the audio as well such as adjusting bass, treble, and volume digitally.

    Lue lisää...
  7. MP3 Player Shield

    MP3 Player Shield

    35,00 €

    The MP3 Player Shield allows you to pull MP3 files from an SD card and play them using only one shield, effectively turning any Arduino into a fully functional stand-alone MP3 player!

    Lue lisää...
  8. LilyPad MP3

    LilyPad MP3

    50,00 €

    Loppu varastosta

    The LilyPad MP3 Player is your all-in-one audio solution, containing an Arduino-compatible microcontroller, MP3 (and many other formats) audio decoder chip, micro-SD card socket, and a stereo audio amplifier.

    Lue lisää...

8 tuote(tta)

/ sivu

Listana  Taulukkona 

Laskeva