Arduino mikrokontrollerit

This is the new Arduino Uno R3. In addition to all the features of the previous board, the Uno now uses an ATmega16U2 instead of the 8U2 found on the Uno (or the FTDI found on previous generations). This allows for faster transfer rates and more memory. No drivers needed for Linux or Mac (inf file for Windows is needed and included in the Arduino IDE), and the ability to have the Uno show up as a keyboard, mouse, joystick, etc.

Everything you need to get started with the Arduino.

The Arduino UNO board included with the kit is the latest Arduino UNO (R3) version and NOT the SMD version. The picture still shows the old kit.

If the Starter Kit seems too basic for your needs, you might want to consider the Sparkfun Inventor's kit. This is the 'retail' version of the SparkFun Inventor's Kit (SIK). This version comes with the carrying case seen in the pictures.

These kits come with Arduino UNO (R3).

The Arduino Ethernet is a microcontroller board based on the Arduino Uno, and incorporating a WizNet W5100 TCP/IP Embedded Ethernet Controller. It can be programmed like an Uno via a six-pin FTDI -style serial connector. Please note! You need the Arduino USB-to-Serial adapter or any FTDI-style USB-to-serial connector to program it.

A separate power-over-Ethernet (PoE) module is soldered to the board to provide power from a conventional twisted pair Category 5 Ethernet cable. It is IEEE802.3af compliant, and works with all compliant PoE injectors currently available.

• ATmega328P
• 3.3V operating voltage
  
• XBee socket for wireless comunication
• Wireless uploading possible
• A connection and charging circuit for LiPo battery

• ATMega2560 (Rev3)
• 54 digital input/output pins
• 14 PWM outputs
• 16 analog inputs
• 4 UARTs (hardware serial ports)

The Arduino ADK is a microcontroller board based on the ATmega2560 (datasheet). It has a USB host interface to connect with Android based phones.

It's blue! It's thin (0.8mm)! It's the Arduino Pro Mini! SparkFun's minimal design approach to Arduino. This is a 5V Arduino running the 16MHz bootloader.

It's blue! It's thin (0.8mm)! It's the Arduino Pro Mini! SparkFun's minimal design approach to Arduino. This is a 3.3V Arduino running the 8MHz bootloader.

The Ethernet Pro is an Arduino-sized, shield-compatible microcontroller with all of the functionality of the Ethernet shield built right in!

The LilyPad Arduino is a microcontroller board designed for wearables and e-textiles.