LilyPad Arduino 328 Main Board
The LilyPad Arduino is a microcontroller board designed for wearables and e-textiles. It can be sewn to fabric and similarly mounted power supplies, sensors and actuators with conductive thread. The board is based on the ATmega328V. The LilyPad Arduino was designed and developed by Leah Buechley and SparkFun Electronics.
Note! LilyPad Arduino does not have a USB connector. You need to use an FTDI Breakout Board or FTDI cable to program the LilyPad. See the related items.
Warning: Don't power the LilyPad Arduino with more than 5.5 volts, or plug the power in backwards: you'll kill it.
|Microcontroller||ATmega168V or ATmega328V|
|Operating Voltage||2.7-5.5 V|
|Input Voltage||2.7-5.5 V|
|Digital I/O Pins||14 (of which 6 provide PWM output)|
|Analog Input Pins||6|
|DC Current per I/O Pin||40 mA|
|Flash Memory||16 KB (of which 2 KB used by bootloader)|
|Clock Speed||8 MHz|