0Item(s)

Ostoskorissasi ei ole yhtään tuotetta.

Product was successfully added to your shopping cart.

Hakutulos haulle 'Adafruit'

Laskeva

   

177 tuote(tta)

  1. 4-channel I2C-safe Bi-directional Logic Level Converter - BSS138

    This level shifter board combines the ease-of-use of the bi-directional TXB0108 with an I2C-compatible FET design following NXP's app note. 

  2. 8-channel Bi-directional Logic Level Converter - TXB0108

    This chip perform bidirectional level shifting from pretty much any voltage to any voltage and will auto-detect the direction. Only thing that doesn't work well with this chip is i2c (because it uses strong pullups which confuse auto-direction sensor). If you need to use pullups, you can, but they should be at least 50K ohm - the ones internal to AVRs/Arduino are about 100K ohm so those are OK!
  3. Adafruit "Music Maker" MP3 Shield for Arduino (MP3/Ogg/WAV...)

    Bend all audio files to your will with the Adafruit Music Maker shield for Arduino! This powerful shield features the VS1053, an encoding/decoding (codec) chip that can decode a wide variety of audio formats such as MP3, AAC, Ogg Vorbis, WMA, MIDI, FLAC, WAV (PCM and ADPCM). It can also be used to record audio in both PCM (WAV) and compressed Ogg Vorbis. You can do all sorts of stuff with the audio as well such as adjusting bass, treble, and volume digitally.

    29,95 €
  4. Adafruit 12-Key Capacitive Touch Sensor Breakout - MPR121

    ‌‌Add lots of touch sensors to your next microcontroller project with this easy-to-use 12-channel capacitive touch sensor breakout board, starring the MPR121. This chip can handle up to 12 individual touch pads.

  5. Adafruit 16-Channel 12-bit PWM/Servo Shield - I2C interface

    Adafruit's PWM Servo Shield for the Arduino.Using only two I2C pins, control 16 free-running PWM outputs! You can even stack up 62 shields to control up to 992 PWM outputs.

    20,00 €
  6. Adafruit 2.8" TFT Touch Shield for Arduino w/ Capacitive Touch

    A capaciteve touchscreen shield for the Arduino.
    46,00 €
  7. Adafruit 9-DOF IMU Breakout - L3GD20H + LSM303

    ‌‌This inertial-measurement-unit combines 2 of the best quality sensors available on the market to give you 9 axes of data: 3 axes of accelerometer data, 3 axes gyroscopic, and 3 axes magnetic (compass). 

    24,00 €
  8. Adafruit AMG8833 IR Thermal Camera FeatherWing

    ‌A FeatherWing for the Panasonic AMG8833 8x8 GridEYE sensor that allows you to create a simple 8x8 pixel thermal camera

    39,95 €
  9. Adafruit Audio FX Sound Board - WAV/OGG Trigger with 16MB Flash

    ‌Small audio player for embedded projects.

    26,00 €
  10. Adafruit Feather 32u4 Basic Proto

    This is the Feather 32u4 Basic Proto, it has a bunch of prototyping space built right in.

    24,00 €
  11. Adafruit Feather 32u4 Bluefruit LE

    ‌This is the Adafruit Feather 32u4 Bluefruit - our take on an 'all-in-one' Arduino-compatible + Bluetooth Low Energy with built in USB and battery charging. Its an Adafruit Feather 32u4 with a BTLE module, ready to rock!

    35,00 €
  12. Adafruit Feather 32u4 FONA

    ‌This is the Adafruit Feather 32u4 FONA - Adafruit's take on an 'all-in-one' Arduino-compatible + audio/sms/data capable cellular with built in USB and battery charging. Its an Adafruit Feather 32u4 with a FONA800 module.

    52,00 €
  13. Adafruit Feather HUZZAH with ESP8266 WiFi

    ‌This is the Adafruit Feather HUZZAH ESP8266 - Adafruit's take on an 'all-in-one' ESP8266 WiFi development board with built in USB and battery charging. Its an  ESP8266 WiFi module with all the extras you need, ready to rock

    18,00 €
  14. Adafruit Feather M0 Adalogger

    ‌Adafruit Feather M0 with SD card slot.

    26,00 €
  15. Adafruit Feather M0 Basic Proto - ATSAMD21 Cortex M0

    ‌This is the Feather M0 Basic Proto, it has a bunch of prototyping space built right in.

    22,50 €
  16. Adafruit Feather M0 Bluefruit LE

    ‌This is the Adafruit Feather M0 Bluefruit LE - Adafruit's take on an 'all-in-one' Arduino-compatible + Bluetooth Low Energy with built in USB and battery charging. Its an Adafruit Feather M0 with a BTLE module.

    35,00 €
  17. Adafruit Feather M0 Express - Designed for CircuitPython - ATSAMD21 Cortex M0

    ‌Adafruit Feather that is specifically designed for use with CircuitPython.

    23,00 €
  18. Adafruit Feather M0 RFM96 LoRa Radio - 433MHz

    ‌This is the Adafruit Feather M0 RFM96 LoRa Radio (433 MHz) - our take on an microcontroller with a "Long Range (LoRa)" packet radio transceiver with built in USB and battery charging.

    43,00 €
  19. Adafruit Feather M0 WiFi - ATSAMD21 + ATWINC1500

    ‌This is the Adafruit Feather M0 WiFi w/ATWINC1500 - our take on an 'all-in-one' Arduino-compatible + high speed, reliable WiFi with built in USB and battery charging. Its an Adafruit Feather M0 with a WiFi module, ready to rock! We have other boards in the Feather family, check'em out here.

    40,00 €
  20. Adafruit Feather M0 WiFi with uFL - ATSAMD21 + ATWINC1500 - fw 19.4.4

    ‌This is the Adafruit Feather M0 WiFi w/ATWINC1500 - our take on an 'all-in-one' Arduino-compatible + high speed, reliable WiFi with built in USB and battery charging. Its an Adafruit Feather M0 with a WiFi module, ready to rock! We have other boards in the Feather family, check'em out here.

    40,00 €
  21. Adafruit Feather M4 Express - Featuring ATSAMD51 - ATSAMD51 Cortex M4

    A‌dafruit Feather board for the ATSAMD51 Cortex M4 chip.

    22,95 €
  22. Adafruit Flex Perma-Proto - Half-sized Breadboard Flex-PCB

    Make your next project super-flexy with a prototyping board that can twist and bend. We took our lovely classic perma-proto design and had it made from incredibly thin polyamide film. It's extremely bendable, and you can cut it easily with scissors.

    7,50 €
  23. Adafruit GEMMA M0 - Miniature wearable electronic platform

    ‌‌The Adafruit Gemma M0 is a super small microcontroller board, with just enough built-in to create many simple projects.

    11,00 €
  24. Adafruit GEMMA v2 - Miniature wearable electronic platform

    GEMMA is a tiny wearable platform board with a lot of might in a 1" diameter package. Powered by a Attiny85 and programmable with an Arduino IDE over USB, you'll be able to realize any wearable project!

    12,00 €
  25. Adafruit HUZZAH32 – ESP32 Feather Board

    ‌Adafruit's ESP32-based Feather, made with the official WROOM32 module

    22,00 €
  26. Adafruit I2S MEMS Microphone Breakout - SPH0645LM4H

    ‌I2S Microphone breakout for using with microcontrollers that have I2S.

  27. Adafruit ItsyBitsy 32u4 - 5V 16MHz

    ‌ItsyBitsy board from Adafruit for the 32u4 chip.

  28. Adafruit ItsyBitsy M4 Express featuring ATSAMD51

    ‌ItsyBitsy board from Adafruit for the ATSAMD51 Cortex M4 chip.

    14,95 €
  29. Adafruit Micro Lipo - USB LiIon/LiPoly charger - v1

    Oh so adorable, this is the tiniest little lipo charger, so handy you can keep it any project box! Its also easy to use. Simply plug in the gold plated contacts into any USB port and a 3.7V/4.2V lithium polymer or lithium ion rechargeable battery into the JST plug on the other end. There are two LEDs - one red and one green. While charging, the red LED is lit. When the battery is fully charged and ready for use, the green LED turns on. Seriously, it could not get more easy.

  30. Adafruit Micro Lipo w/MicroUSB Jack - USB LiIon/LiPoly charger - v1

    ‌Tiny charger for 3.7V/4.2V lithium polymer or lithium ion rechargeable batteries.

     

    7,90 €
  31. Adafruit Mini Lipo w/Mini-B USB Jack - USB LiIon/LiPoly charger - v1

    ‌Tiny charger for 3.7V/4.2V lithium polymer or lithium ion rechargeable batteries.

  32. Adafruit Motor/Stepper/Servo Shield for Arduino v2 Kit - v2.3

    Adafruit motor shield for running DC, stepper and servo motors.

    23,00 €
  33. Adafruit NeoPixel Digital RGB LED Weatherproof Strip 30 LED -1m - BLACK

    These NeoPixel strips have 30 digitally-addressable pixel LEDs per meter and are very affordable and are only 12.5 mm wide, 10 mm if you remove the strip from the casing. This is the strip with black flex PCB.

    18,50 €
  34. Adafruit NeoPixel Digital RGB LED Weatherproof Strip 60 LED -1m - BLACK

    These NeoPixel strips have 60 digitally-addressable pixel LEDs per meter and are very affordable and are only 12.5 mm wide, 10 mm if you remove the strip from the casing. This is the strip with black flex PCB.

    27,00 €
  35. Adafruit NeoPixel Digital RGB LED Weatherproof Strip 60 LED -1m - WHITE

    These NeoPixel strips have 60 digitally-addressable pixel LEDs per meter and are very affordable and are only 12.5 mm wide, 10 mm if you remove the strip from the casing. This is the strip with white flex PCB.

    27,00 €
  36. Adafruit NeoPixel Digital RGBW LED Strip - White PCB 144 LED/m - 1m

    ‌This is the 144 LED/m RGBW strip with a White Casing and White PCB! 

    79,00 €
  37. Adafruit NeoPixel Digital RGBW LED Strip - White PCB 60 LED/m

    • RGBW (Natural White 4000–4500K)
    • 60 LED/m
    • White PCB
    29,00 €
  38. Adafruit NeoPixel LED Side Light Strip - Black 90 LED

    ‌Neopixel strip with LEDs that point to the side instead of straight up.

    28,00 €
  39. Adafruit NeoPXL8 FeatherWing for Feather M0 - 8 x DMA NeoPixels!

    ‌Use this together with the NeoPXL8 Arduino library to for more powerful control of up to 8 strips of NeoPixels.

  40. Adafruit Perma-Proto Half-sized Breadboard PCB - 3 Pack!

    A breadboard shaped prototyping board from Adafruit! Great for transferring your projects from a breadboard to a more permanent PCB.

    12,50 €
  41. Adafruit Perma-Proto Half-sized Breadboard PCB - Single

    Prototyping board in the shape of a breadboard.

  42. Adafruit Perma-Proto Quarter-sized Breadboard PCB - Single

    Prototyping board in the shape of a breadboard.

  43. Adafruit Pi T-Cobbler Plus Kit Breakout for 2x20 Raspberry Pi - RasPi A+, B+, Pi 2, Pi 3, Zero

    ‌‌The T-Cobbler Plus is an add on prototyping board from Adafruit specifically designed for the newer Raspberry Pi computers with a 2x20 connector, that can break out all those tasty power, GPIO, I2C and SPI pins from the 40-pin header onto a solderless breadboard. This set will make "cobbling together" prototypes with the Pi super easy.

  44. Adafruit PN532 NFC/RFID Controller Shield for Arduino + Extras

    The Adafruit NFC shield is the perfect tool for any 13.56MHz RFID or NFC application. It uses the PN532 chip-set (the most popular NFC chip on the market) and is what is embedded in pretty much every phone or device that does NFC. This chipset is very powerful, and can pretty much do it all, such as read and write to tags and cards, communicate with phones (say for payment processing), and 'act' like a NFC tag. While the controller has many capabilities, our Arduino library currently only supports reading/writing tags, and does not support phone-to-shield communication, tag emulation (which requires an external 'secure element' only available from NXP) or other more advanced features at this time. 

    39,95 €
  45. Adafruit Power Relay FeatherWing

    ‌This is the Power Relay FeatherWing. It gives you power to control, and control over power.

    12,00 €
  46. Adafruit Pro Trinket – 3V 12MHz

    ‌The Trinket Pro is a small ATmega328 microcontroller made by Adafruit. This is the 3.3V version that runs at 12MHz.

    12,00 €
  47. Adafruit Pro Trinket – 5V 16MHz

    ‌The Trinket Pro is a small ATmega328 microcontroller made by Adafruit. This is the 5V version that runs at 16MHz.

    12,00 €
  48. Adafruit SGP30 Air Quality Sensor Breakout - VOC and eCO2

    ‌This is a gas sensor that can detect a wide range of Volatile Organic Compounds (VOCs) and H2 and is intended for indoor air quality monitoring.

    20,00 €
  49. Adafruit Trinket M0 - for use with CircuitPython & Arduino IDE

    ‌A tiny M0 equipped board. Just as tiny as the original trinket, but much more powerful.

  50. Adafruit Trinket – 3.3V

    ‌Trinket is a small ATtiny85-based microcontroller with built-in USB bootloader. This is the 3V version.

  51. Adafruit Trinket – 5V

    ‌Trinket is a small ATtiny85-based microcontroller with built-in USB bootloader. This is the 5V version.

  52. Adalogger FeatherWing - RTC + SD Add-on For All Feather Boards

    Adalogger FeatherWing adds both a battery-backed Real Time Clock and micro SD card storage to any Feather main board.

  53. ADXL335 - 5V ready triple-axis accelerometer (+-3g analog out)

    ADXL335 accelerometer breakout board from Adafruit. It has an on-board 3.3V regulator - making it a perfect choice for interfacing with a 5V microcontroller such as the Arduino. This breakout comes with 3 analog outputs for X, Y and Z axis measurements on a 0.75"x0.75" breakout board. The ADXL335 is the latest and greatest from Analog Devices, known for their exceptional quality MEMS devices. The VCC takes up to 5V in and regulates it to 3.3V with an output pin. The analog outputs are ratiometric: that means that 0g measurement output is always at half of the 3.3V output (1.65V), -3g is at 0v and 3g is at 3.3V with full scaling in between.

    15,00 €
  54. Aluminum Flex Shaft Coupler - 5mm to 8mm

    ‌This coupler will connect a 5mm diameter shaft to an 8mm diameter shaft.

  55. Analog Feedback Micro Servo - Metal Gear

    It looks like a micro servo, it acts like a micro servo, but it's more than just a micro servo! Adafruit got a factory to custom-make these quality metal-geared 'micro' sized hobby servos with a twist - the feedback (potentiometer wiper) line is brought out to a fourth white wire. You can read this wire with an analog input such as those on an Arduino, to get the servo's position. That information can be used in robotics to improve stability or even allow 'recording' of servo motion.

    15,00 €
  56. Analog Feedback Servo

    It looks like a servo, it acts like a servo, but it's more than just a servo! Adafruit got a factory to custom-make these classic 'standard' sized hobby servos with a twist - the feedback (potentiometer wiper) line is brought out to a fourth white wire. You can read this wire with an analog input such as those on an Arduino, to get the servo's position. That information can be used in robotics to improve stability or even allow 'recording' of servo motion.

    15,00 €
  57. Anemometer Wind Speed Sensor w/Analog Voltage Output

    An anemometer is a device used for measuring wind speed, and is a common weather station instrument. This well made anemometer is designed to sit outside and measure wind speed with ease.

    47,00 €
  58. Antistatic Modular Snap Boxes - SMD component storage - 5 pack - Antistatic

    ‌Storage box for SMD components or other small parts.

  59. Bluefruit LE - Bluetooth Low Energy (BLE 4.0) - nRF8001 Breakout

    Adafruit Bluefruit LE (Bluetooth Smart, Bluetooth Low Energy, Bluetooth 4.0) nRF8001 Breakout allows you to establish an easy to use wireless link between your Arduino and any compatible iOS or Android (4.3+) device. It works by simulating a UART device beneath the surface, sending ASCII data back and forth between the devices, letting you decide what data to send and what to do with it on either end of the connection.

    21,00 €
  60. Circuit Playground Classic

    ‌‌Would you like to learn electronics, with an all-in-one board that has sensors and LEDs built in?Circuit Playground is here - and it's the best way to practice programming on real hardware with no soldering or sewing required!

    23,90 €
  61. Circuit Playground Express

    ‌Circuit Playground Express is an M0 version of the Circuit Playground that supports CircuitPython.

    27,00 €
  62. Conductive Fiber - Stainless Steel 20um - 10 grams

    This solid stainless-steel conductive fiber is super interesting! It's great for felting and could also be spun into yarn if that's your thing. We tested many different fiber thicknesses for needle felting and found that this one (20um fiber thickness, 316L steel, straight fiber) is the most pleasurable to work with. Use about 0.2g of the stuff to make a felt touch button suitable for use with the MaKey MaKey or capacitive touch sensing circuit. Make felt controllers or felt buttons onto an existing wool sweater! 

  63. Conductive Rubber Cord Stretch Sensor + extras!

    Measuring stretch forces isn't easy - unless you have some conductive rubber cord! This cord is 2mm diameter, and roughly 1 meter long, made of carbon-black impregnated rubber. Usually this material is used for EMF gasketing, but its also very fun to play with.

    10,00 €
  64. Continuous Rotation Servo - FeeTech FS5103R

    ‌This servo rotates fully forward or backwards instead of moving to a position. You can use any servo code, hardware or library to control these servos. Good for making simple moving robots. Comes with four different horns, as shown.
    18,00 €
  65. DC Gearbox Motor - "TT Motor" - 200RPM - 3 to 6VDC

    ‌A simple geared DC motors know as TT motor. Suitable for simple robots or other projects where an affordable motor is needed.

  66. DC Motor + Stepper FeatherWing Add-on For All Feather Boards

    DC Motor + Stepper FeatherWing which will let you use 2 x bi-polar stepper motors or 4 x brushed DC motors (or 1 stepper and 2 DC motors).

    22,00 €
  67. DS3231 Precision RTC FeatherWing - RTC Add-on For Feather Boards

    ‌This is the DS3231 Precision RTC FeatherWing: it adds an extremely accurate I2C-integrated Real Time Clock (RTC) with a Temperature Compensated Crystal Oscillator (TCXO)  to any Feather main board.

    15,00 €
  68. Dual H-Bridge Motor Driver for DC or Steppers - 600mA - L293D

    ‌‌Run four solenoids, two DC motors or one bi-polar or uni-polar stepper with up to 600mA per channel using the L293D. 

  69. ESP8266 SMT Module - ESP-12E

    ‌The ESP8266 processor from Espressif is an 80 MHz microcontroller with a full WiFi front-end (both as client and access point) and TCP/IP stack with DNS support as well.

  70. FadeCandy - Dithering USB-Controlled Driver for NeoPixels

    Control Neopixels and other LEDs with your computer with the FadeCandy.
    29,00 €
  71. Feather Stacking Headers - 12-pin and 16-pin female headers

    ‌‌A set of two stacking headers meant for the Adafruit Feather boards. 

  72. FeatherWing Doubler - Prototyping Add-on For All Feather Boards

    ‌Use the FeatherWing Doubler to connect your Feather board to a FeatherWing without stacking them. You also get plenty of prototyping space just like a on the FeatherWing Proto.

  73. FeatherWing Proto - Prototyping Add-on For All Feather Boards

    A prototyping add-on for all Feather boards

  74. FeatherWing Tripler Mini Kit - Prototyping Add-on For Feathers

    ‌Use the FeatherWing Tripler to connect your Feather board to FeatherWings without stacking them. You also get plenty of prototyping space just like a on the FeatherWing Proto.

  75. Female DC Power adapter - 2.1mm jack to screw terminal block

    T‌hese adpaters have a 2.1mm DC jack on one end, and a screw terminal block on the other. 

  76. Flora Color Sensor with White Illumination LED - TCS34725

    Color sensor suitable for e-textile projects.
  77. Flora RGB Smart NeoPixel version 2 - Pack of 4

    4 individually controllable neopixel RGB leds with sewable tabs.
  78. Flora RGB Smart NeoPixel version 2 - Sheet of 20

    ‌A sheet of 20 Flora NeoPixels.

    39,00 €
  79. Heart Rate Educational Starter Pack with Polar Wireless Sensors

    ‌‌Read wireless heart-rate data into your electronics projects in under 10 minutes with this educational experimentation kit for Polar wireless heart rate bands.

    67,00 €
  80. JST PH 2-Pin Cable - Female Connector 100mm

    ‌Your basic JST PH connector wire.

  81. JST PH 2-Pin Cable – Male Header 200mm

    Cable with JST PH male connector

  82. JST PH 2-pin Extension Cable with On/Off Switch - JST PH2

    ‌JST PH extension cable with on/off switch. Great with Lithium Polymer batteries.

  83. JST SM 2-pin Plug + Receptacle Cable Set

    ‌JST SM connectors. These are the same connectors that are on the Neopixel strips.

  84. Large Enclosed Piezo Element w/Wires

    This large (30mm diameter) piezo element is nicely enclosed with mounting holes so you can attach easily. Piezo elements convert vibration to voltage or voltage to vibration. That means you can use this as a buzzer for making beeps, tones and alerts AND you can use it as a sensor, to detect fast movements like knocks. You can also use it under a drum pad to make a drum/crash sensor.

  85. Large Modular Snap Box - SMD component storage - Orange

    ‌Storage box for SMD components or other small parts.

  86. Linear Bearing Platform (Small) - 8mm Diameter - SC8UU

    ‌‌Make your robot or CNC move on rails super fast with a linear bearing platform. The platform is 34mm x 30mm and has four holes tapped for M4 machine screws so you can attach pretty much anything you want. 

  87. Liquid Crystal Light Valve - LCD Controllable Black-out Panel

    ‌A Liquid Crystal Light Valve (a.k.a a LCD Controllable Black-out Panel).

  88. Maker Paste Lead-Free Prototyping Solder Paste

    ‌Lead-Free Prototyping Solder Paste from IC Breakout.

    9,00 €
  89. Male DC Power adapter - 2.1mm plug to screw terminal block

    T‌hese adpaters have a 2.1mm DC plug on one end, and a screw terminal block on the other. 

  90. MCP9808 High Accuracy I2C Temperature Sensor Breakout Board

    ‌This I2C digital temperature sensor is one of the more accurate/precise we've ever seen, with a typical accuracy of ±0.25°C over the sensor's -40°C to +125°C range and precision of +0.0625°C.

  91. Medium Modular Snap Box - SMD component storage - 2 Pack - Pink

    ‌Storage box for SMD components or other small parts.

  92. Medium Surface Transducer with Wires - 4 Ohm 3 Watt

    ‌‌Turn any surface/wall/table etc into a speaker with a surface transducer.

    17,00 €
  93. Micro Servo - Metal Gear (MG90S)

    Small micro servo with metal gears.
    10,00 €
  94. MiFare Classic (13.56MHz RFID/NFC) Sticker - 1KB

    This is a blank MiFare Classic sticker - often used for inventory, identification but also found in other systems where a flexible, thin tag is desired. The tag contains a NXP S50 chip and an antenna, and is passively powered by the reader/writer when placed a couple inches away.

  95. MiFare Classic (13.56MHz RFID/NFC) White Tag - 1KB

    This is a blank MiFare Classic 'laundry' tag - often used for laundry or identification but also found in other systems where a small proximity card is desired. The tag contains a NXP S50 chip and an antenna, and is passively powered by the reader/writer when placed a couple inches away

  96. Mini Round Robot Chassis Kit - 2WD with DC Motors

    ‌‌Unleash your inner Mad Max and make your vehicle dreams a reality with the Mini Red Round Robot Chassis Kit.

    22,00 €
  97. MintyBoost Kit + Tin - v3.0

    The world's first and only open-source hardware charger: The MintyBoost®!

    Make your own iPod/iPhone/GPS/etc... battery-pack and recharger! This project includes all the electronic parts necessary to build your own MintyBoost: a small & simple (but very powerful) USB charger for your iPod (or other mp3 player), camera, cell phone, and any other gadget you can plug into a USB port to charge. Comes with an Altoids Gum sized tin.

    22,00 €
  98. NeoPixel 1/4 60 Ring - 5050 RGB LED w/ Integrated Drivers

    1/4 of Neopixel Ring with 60 RGB LEDs. (This piece has 15 LEDs)

  99. NeoPixel 1/4 60 Ring - 5050 RGBW LED w/ Integrated Drivers - Natural White - ~4500K

    ‌This is the NeoPixel 1/4 60 LED Ring in Natural White.

    13,50 €
  100. NeoPixel Diffused 5mm Through-Hole LED - 5 Pack

    ‌Each LED looks just like a shorter version of the classic through-hole 5mm RGB LED with 4 legs, but instead of just red/green/blue there's a little chip inside that can control the LED with high speed PWM for 24-bit color.

  101. NeoPixel Diffused 8mm Through-Hole LED - 5 Pack

    ‌NeoPixel LEDs in a through-hole format. 8mm.

  102. NeoPixel Ring - 12 x WS2812 5050 RGB

    This is the 16 LED NeoPixel Ring from Adafruit, a small chainable 1.5" (37mm) outer diameter board equipped with 5050 WS2812 RGB LEDs. The WS2812s are each addressable as the driver chip is located inside the LED. Each one has ~18mA constant current drive so the color will be very consistent even if the voltage varies, and requires 5V.

  103. NeoPixel Ring - 16 x WS2812 5050 RGB LED

    This is the 16 LED NeoPixel Ring from Adafruit, a small chainable 1.75" (44.5mm) outer diameter board equipped with 5050 WS2812 RGB LEDs. The WS2812s are each addressable as the driver chip is located inside the LED. Each NeoPixel Stick has ~18mA constant current drive so the color will be very consistent even if the voltage varies, and requires 5V.

    10,00 €
  104. NeoPixel Ring - 24 x WS2812 5050 RGB LED

    This is the 16 LED NeoPixel Ring from Adafruit, a small chainable 1.75" (44.5mm) outer diameter board equipped with 5050 WS2812 RGB LEDs. The WS2812s are each addressable as the driver chip is located inside the LED. Each NeoPixel Stick has ~18mA constant current drive so the color will be very consistent even if the voltage varies, and requires 5V.

    19,95 €
  105. NeoPixel Stick - 8 x WS2812 5050 RGB LED with Integrated Drivers

    Make your own little LED strip arrangement with this stick of NeoPixel LEDs. Adafruit crammed 8 of the tiny 5050 (5mm x 5mm) smart RGB LEDs onto a PCB with mounting holes and a chainable design. Use only one microcontroller pin to control as many as you can chain together!

  106. Op Amp - Dual Rail-to-Rail - 2.7-6V power @ 80mA output - TLV2462

    ‌‌When you need to amplify, filter, add, or otherwise manipulate analog signals you'll certainly want an operational amplifier at your side.

  107. Orange and Clear TT Motor Wheel for TT DC Gearbox Motor

    ‌A nice silicone wheel for the TT motors we sell.

  108. Panel Mount Ethernet Extension Cable

    ‌‌This handy Ethernet extension cable will make it easy for you to enclose a device that has an Ethernet port. We think this would be most useful when putting a Beagle Bone, Raspberry Pi, Arduino Ethernet into a box.

  109. Panel mount HDMI Cable - 40 cm

    ‌‌This panel mount extension cable will allow you to extend an HDMI connection and secure it to an enclosure. Perfect for placing your Raspberry Pi in a secure box. 

  110. Panel Mount USB Cable - A Male to A Female

    ‌‌This handy USB extension cable will make it easy for you to enclose a device that has a A type (USB host) port. We think this would be most handy when putting a Beagle Bone, Raspberry Pi or Mintyboost into a box.

  111. Panel Mount USB Cable - B Female to Micro-B Male

    ‌Panel mount USB connector (type micro-B to type B)

  112. Panel Mount USB Cable - B Male to B Female

    ‌Panel mount USB connector (type B to type B)

  113. Particle Photon with Headers

    ‌The Photon is a tiny Wi-Fi development kit for creating connected projects and products for the Internet of Things. It's easy to use, it's powerful, and it's connected to the cloud.‌

    25,00 €
  114. Passive GPS Antenna uFL - 9mm x 9mm -2dBi gain

    ‌A GPS antenna for the FONA 808.

  115. Peristaltic Liquid Pump with Silicone Tubing

    Peristaltic liquid pump for accurately controlling the flow of liquid.

    29,90 €
  116. PN532 NFC/RFID controller breakout board - v1.6

    ‌PN532 breakout board from Adafruit.

    39,95 €
  117. PowerBoost 500 Charger - Rechargeable 5V Lipo USB Boost @ 500mA+

    ‌This little DC/DC boost converter module can be powered by any 3.7V LiIon/LiPoly battery, and convert the battery output to 5.2V DC for running your 5V projects.

    17,00 €
  118. Premium Female/Female Jumper Wires - 40 x 3" (75mm)

    ‌Female to female jumper wires. 75 mm long.

  119. Premium Female/Female Jumper Wires - 40 x 6" (150m)

    ‌Female to female jumper wires. 150mm long

  120. Premium Male/Male Jumper Wires - 40 x 3" (75mm)

    40 pieces of 75 mm jumper cables.
  121. Premium Male/Male Jumper Wires - 40 x 6" (150mm)

    40 pieces of 150 mm jumper cables.

  122. Pressure-Sensitive Conductive Sheet (Velostat/Linqstat)

    ‌This conductive material (also known as "Velostat" or "Linqstat") is a nice addition for your wearable/sensor hacking toolkit. It's pressure-sensitive: squeezing it will reduce the resistance, so it's handy for making flexible sensors.

  123. Purple Aluminum Chassis for TT Motors - 2WD

    ‌A chassis that is perfect for the TT motors.

    15,00 €
  124. RGB LCD Shield Kit w/ 16x2 Character Display - Only 2 pins used! - POSITIVE DISPLAY

    This new Adafruit shield makes it easy to use a 16x2 Character LCD. It allows you to control a 16x2 Character LCD, up to 3 backlight pins AND 5 keypad pins using only the two I2C pins on the Arduino! The best part is you don't really lose those two pins either, since you can stick i2c-based sensors, RTCs, etc and have them share the I2C bus. This is a super slick way to add a display without all the wiring hassle.

    Please note that this is a kit that requires assembly.

    24,00 €
  125. Short Feather Headers Kit - 12-pin and 16-pin Female Header Set

    ‌These headers are particularly cute and tiny with a body height of just 5.0 mm they are the best way to minimize the amount of space your Feather project takes up, but still maintain that flexible configuration

  126. Short Feather Male Headers - 12-pin and 16-pin Male Header Set

    ‌These headers are particularly cute and tiny and are designed to match perfectly with our shorty female header kit for Featherwings.

  127. Silicone Clips for NeoPixel LED Strips - set of 5

    These nylon clips will let you attach our flexible NeoPixel strips to a wall, moulding, or project. Just side the rubber tubing thru so that the clips are in between two LEDs. Comes in a pack of 5.‌

  128. Silicone Cover Stranded-Core Wire - 15m 30AWG Blue

    ‌Silicone covered wire. It's soft and flexible.

  129. Silicone Cover Stranded-Core Wire - 15m 30AWG Red

    ‌Silicone covered wire. It's soft and flexible.

  130. Silicone Cover Stranded-Core Wire - 25ft 26AWG - White

    Soft, flexible and strong silicone covered wire.

  131. Silicone Cover Stranded-Core Wire - 7.6m/25ft 26AWG - Black

    ‌Flexible silicone covered wire. Excellent for any projects where the wires need to be able to handle moving around a lot.

  132. Silicone Cover Stranded-Core Wire - 7.6m/25ft 26AWG - Red

    ‌Flexible silicone covered wire. Excellent for any projects where the wires need to be able to handle moving around a lot.

  133. Slim Sticker-type GSM/Cellular Quad-Band Antenna - 3dBi uFL

    ‌75mm long antenna with a 3 dBi gain. For 850/900/1800/1900/2100 bands.

  134. Small Modular Snap Boxes - SMD component storage - 3 pack - Green

    ‌Storage box for SMD components or other small parts.

  135. SMT 0603 Resistor and Capacitor Book - 3725 pieces

    A handy book of 0603 SMD resistors and capacitors.

    42,00 €
  136. SMT/SMD 0805 Resistor and Capacitor Book - 3725 pieces

    ‌A handy book of 0805 SMD resistors and capacitors

    42,00 €
  137. Softpot Rotary Potentiometer

    These are very thin variable potentiometers. By pressing down on various parts of the rotary dial, the resistance linearly changes from 100Ohms to 10,000Ohms allowing the user to very accurately calculate the relative position on the rotary.

    11,00 €
  138. Solenoid – Medium Size (9-24 DC)

    A great all-purpose solenoid. 30mm long body and a 'captive' armature with a return spring.

    10,00 €
  139. Stainless Medium Conductive Thread - 3 ply - 18 meter

    After months of searching, we finally have what we consider to be the ultimate conductive thread. It's thin, strong, smooth, and made completely of 316L stainless steel. Once you start working with this thread you'll quickly agree its optimal for any wearables work!

  140. Standard servo - TowerPro SG-5010 - 5010

    ‌This high-torque standard servo can rotate approximately 180 degrees (90 in each direction). You can use any servo code, hardware or library to control these servos.

    15,00 €
  141. Stepper Motor - NEMA-17 size - 200 steps/rev, 12V 350mA

    This 4-wire bipolar stepper has 1.8° per step for smooth motion and a nice holding torque. 12V/350 mA/35Ω

    15,90 €
  142. Stereo 2.1W Class D Audio Amplifier - TPA2012

    ‌‌This incredibly small stereo amplifier is surprisingly powerful - able to deliver 2 x 2.1W channels into 4 ohm impedance speakers (@ 10% THD).

    11,00 €
  143. Stereo 2.8W Class D Audio Amplifier - I2C Control AGC - TPA2016

    A mini class D with AGC and I2C control? Yes please! This incredibly small stereo amplifier is surprisingly powerful. It is able to deliver 2 x 2.8W channels into 4 ohm impedance speakers (@ 10% THD) and it has a i2c control interface as well as an AGC (automatic gain control) system to keep your audio from clipping or distorting.

    11,00 €
  144. Stereo 20W Class D Audio Amplifier - MAX9744

    Pump up the volume with this 20W stereo amplifier! This slim little board has a class D amplifier onboard that can drive 2 channels of 4-8 ohm impedance speakers at 20W each. Power it with 5-12VDC using the onboard DC power jack and plug stereo line level into the 3.5mm stereo headphone jack and jam out with ease. Since it's class D, its completely cool-running, no heat sinks are required and it's extremely efficient - up to 93% efficiency makes it great for portable or battery powered rigs.

    20,00 €
  145. Stereo 3.7W Class D Audio Amplifier - MAX98306

    ‌‌This incredibly small stereo amplifier is surprisingly powerful - able to deliver 2 x 3.7W channels into 3 ohm impedance speakers. Inside the miniature chip is a class D controller, able to run from 2.7V-5.5VDC.

    11,00 €
  146. TCA9548A I2C Multiplexer

    I2C multiplexer that allows you to use multiple I2C devices with the same address.
  147. Teensy 3.x Feather Adapter

    ‌This Feather adapter rearranges the pins of a Teensy 3.x to give you the same shape and pinout for our Feathers. We've tested our FeatherWings so far and all are drop-in compatible.

  148. Thermal Paper Roll - 33' long, 2.25"

    ‌A little roll of thermal paper! This fits very nicely into our Tiny Thermal Receipt Printer. It's ~2.25" wide (about 57mm) and 33 feet long or about 10 meters.

  149. Tiny Modular Snap Boxes - SMD component storage - 10 pack - White

    ‌Storage box for SMD components or other small parts.

  150. Tiny Thermal Receipt Printer - TTL Serial / USB

    ‌Thermal printer with USB connector.

    56,00 €
  151. USB 'Noodle' Cable - A/MicroB - 1 meter

    ‌1 meter long flat microUSB cable

    4,50 €
  152. USB BATTERY PACK FOR RASPBERRY PI - 10000MAH - 2 X 5V OUTPUTS

    ‌A large-sized rechargeable battery pack for your Raspberry Pi or any other USB-powered devices. Two ports, one provides 1A and the other 2A.

    42,00 €
  153. VS1053 Codec + MicroSD Breakout - MP3/WAV/MIDI/OGG Play + Record

    This breakout board is the ultimate companion for the VLSI VS1053B DSP codec chip. The VS1053 can decode a wide variety of audio formats such as MP3, AAC, Ogg Vorbis, WMA, MIDI, FLAC, WAV (PCM and ADPCM). It can also be used to record audio in both PCM (WAV) and compressed Ogg Vorbis. You can do all sorts of stuff with the audio as well such as adjusting bass, treble, and volume digitally. There is also 8 GPIO pins that can be used for stuff like lighting up small LEDs or reading buttons.

    25,00 €
Laskeva

   

177 tuote(tta)