0Item(s)

Ostoskorissasi ei ole yhtään tuotetta.

Product was successfully added to your shopping cart.

AVR Mikrokontrollerit

Laskeva

   

9 tuote(tta)

  1. Adafruit Trinket – 3.3V

    ‌Trinket is a small ATtiny85-based microcontroller with built-in USB bootloader. This is the 3V version.

  2. Adafruit Trinket – 5V

    ‌Trinket is a small ATtiny85-based microcontroller with built-in USB bootloader. This is the 5V version.

  3. ATmega48-20PU

    4K, 20MHZ, 5V, 28DIP

  4. Pocket AVR Programmer

    This is a simple to use USB AVR programmer. It is low cost, easy to use, works great with AVRDude.

    14,00 €
  5. Tiny AVR Programmer

    The ATtiny45 and 85 are a couple of really cool little MCUs but did you know you can program them in Arduino? That's right, now you can shrink your Arduino projects down to "tiny size" by moving your code straight over to these small but capable ICs. The standard method for programming the ATtiny ICs involves a breadboard, lots of jumper wires and a hardware programmer, but David Mellis over at MIT Media Lab has simplified the process by laying out this handy USB programmer.

    21,00 €
  6. ATtiny85 - AVR 8 Pin 20MHz 8K 4A/D

    Atmel's itty-bitty ATtiny85 8-Bit Processor. 8K of program space, 6 I/O lines, and 4-channel 10 bit ADC. Runs up to 20MHz with external crystal. Package can be programmed in circuit.

  7. DIP Socket - 28 pin

    Dip sockets for all your prototyping needs.  If you've ever had to de-solder a dip part from a circuit board, you know how valuable these are! 28 pins.

  8. DIP Socket - 8 pin

    Dip sockets for all your prototyping needs.  If you've ever had to de-solder a dip part from a circuit board, you know how valuable these are! 8 pins.

  9. ATmega328 with Arduino Optiboot (Uno)

    The name says it all on this one. An ATmega328 in DIP package, pre-loaded with the Arduino Optiboot (Uno 16MHz) Bootloader. This will allow you to use Arduino code in your custom embedded project without having to use an actual Arduino board.

    To get this chip working with Arduino IDE, you will need an external 16MHz crystal or resonator, a 5V supply, and a serial connection. If you are not comfortable doing this, we recommend purchasing the Arduino Uno board that has all of these built into the board.

Laskeva

   

9 tuote(tta)