0Item(s)

Ostoskorissasi ei ole yhtään tuotetta.

Product was successfully added to your shopping cart.
DC Gearbox Motor - "TT Motor" - 200RPM - 3 to 6VDC

DC Gearbox Motor - "TT Motor" - 200RPM - 3 to 6VDC

3,25 €

Varastossa (kpl): 48

DC Gearbox Motor - "TT Motor" - 200RPM - 3 to 6VDC

Kuvaus

‌A simple geared DC motors know as TT motor. Suitable for simple robots or other projects where an affordable motor is needed.



Varastossa (kpl): 48

3,25 €

Yksityiskohdat

P‌erhaps you've been assembling a new robot friend, adding a computer for a brain and other fun personality touches. Now the time has come to let it leave the nest and fly on its own wings– err, wheels! 

These durable (but affordable!) plastic gearbox motors (also known as 'TT' motors) are an easy, low-cost way to get your projects moving. This is a TT DC Gearbox Motor with a gear ratio of 1:48, and it comes with 2 x 200mm wires with breadboard-friendly 0.1" male connectors. Perfect for plugging into a breadboard or terminal blocks.

You can power these motors with 3VDC up to 6VDC, they'll of course go a little faster at the higher voltages. We grabbed one motor and found these stats when running it from a bench-top supply

  • At 3VDC we measured 150mA @ 120 RPM no-load, and 1.1 Amps when stalled
  • At 4.5VDC we measured 155mA @ 185 RPM no-load, and 1.2 Amps when stalled
  • At 6VDC we measured 160mA @ 250 RPM no-load, and 1.5 Amps when stalled

Note that these are very basic motors, and have no built-in encoders, speed control or positional feedback. Voltage goes in, rotation goes out! There will be variation from motor to motor, so a separate feedback system is required if you need precision movement.

Comes 1 x per order, with just the motor + wires. You cannot drive these directly from a microcontroller, a high-current motor driver is required! We recommend our DRV8833 motor driver for these motors, as it works well down to 3V and can be set up with current limiting since the stall current on these can get high. The TB6612 can also be used, it's on Adafruit's shields and wings, but you'll need to supply at least 4.5V - which is what you'll likely want to run these motors at anyhow!

These are almost the same as the Makeblock TT motors we sell, just with different connector cables.

We currently stock also three compatible wheels:

  • Orange and Clear TT Motor Wheel for TT DC Gearbox Motor (From Adafruit)
  • Makeblock Plastic Timing Pulley 62T (4-Pack) (From Makeblock)
  • Makeblock Plastic Timing Pulley 90T (4-Pack) (From Makeblock)

Lisätiedot

Tuotekoodi ADA-3777
Valmistaja Adafruit
Tavarantoimittaja Adafruit
Valmistajan linkit ‌Adafruit Product Page

Tuotteen asiasanat

Käytä välilyöntejä erottaaksesi asiasanat. Käytä puolilainausmerkkejä (') lauseille.

  1. Arvostele ensimmäisenä tämä tuote

Kirjoita oma arvostelusi

Miten arvioisit tämän tuotteen? *

  1 tähti 2 tähteä 3 tähteä 4 tähteä 5 tähteä
Price
Value
Quality

Also Purchased