Rekisteröitymisessä tilauksen yhteydessä on ollut ongelmia. Ongelma on nyt korjattu.

0Item(s)

Ostoskorissasi ei ole yhtään tuotetta.

Product was successfully added to your shopping cart.

Mekaniikka ja robotit

Laskeva

   

Tuotteet 1-20 / 110

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. SN754410 – H-Bridge Motor Driver 1A

    SN754410 Quad Half H-Bridge. 1 A.
  2. Vibration Motor

    A small vibration motor for adding some tactile feedback for your project.

    5,00 €
  3. Servo Motor - Large

    Here is a simple, low-cost, high quality servo for all your mechatronic needs. Large servo with a standard 3 pin power and control cable. Includes hardware as shown.

    11,00 €
  4. Slide Pot - Motorized (10k Audio Taper)

    These motorized sliders are very cool. Each is essentially a standard slide pot which is belt-driven by a small motor. The slide contains two separate 10k audio taper potentiometers so that you can use one as servo-feedback in order to read the position of the slider and use the other to control whatever your target is. There is also a touch sense line which is electrically connected directly to the metal slider tab so that you can interface the slider with capacitive touch circuitry.

    Comes with a black slider knob.

    20,00 €
  5. Slide Pot - Motorized (10k Linear Taper)

    These motorized sliders are very cool. Each is essentially a standard slide pot which is belt-driven by a small motor. The slide contains two separate 10k linear taper potentiometers so that you can use one as servo-feedback in order to read the position of the slider and use the other to control whatever your target is. There is also a touch sense line which is electrically connected directly to the metal slider tab so that you can interface the slider with capacitive touch circuitry.

    n interface the slider with capacitive touch circuitry.

    Comes with a black slider knob.

    20,00 €
  6. Surface Transducer - Large

    Surface transducers give you the awesome power to turn almost any surface into a speaker. They're essentially just a speaker except instead of a cone, the coil is attached to a pad that conducts the vibration into whatever you press it against. Hook it up to an audio source and press it against the nearest table, wall or cardboard box. You can even put it against your head and play music directly into your skull (the ultimate surround sound).

    19,00 €
  7. Surface Transducer - Small

    Surface transducers give you the awesome power to turn almost any surface into a speaker.

    This one is really small. About the size of a 1 € coin.

    10,00 €
  8. LilyPad Vibe Board

    Apply 5V and be shaken by this small, but powerful vibration motor. Works great as an physical indicator without notifying anyone but the wearer. This version uses a surface mount motor which is less likely to be damaged during use.

    LilyPad is a wearable technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They're even washable!

    10,00 €
  9. Micro Servo - Metal Gear (MG90S)

    Small micro servo with metal gears.
    10,00 €
  10. Adafruit 16-Channel 12-bit PWM/Servo Shield - I2C interface

    Adafruit's PWM Servo Shield for the Arduino.Using only two I2C pins, control 16 free-running PWM outputs! You can even stack up 62 shields to control up to 992 PWM outputs.

    20,00 €
  11. Adafruit Motor/Stepper/Servo Shield for Arduino v2 Kit - v2.3

    Adafruit motor shield for running DC, stepper and servo motors.

    23,00 €
  12. Analog Feedback Servo

    It looks like a servo, it acts like a servo, but it's more than just a servo! Adafruit got a factory to custom-make these classic 'standard' sized hobby servos with a twist - the feedback (potentiometer wiper) line is brought out to a fourth white wire. You can read this wire with an analog input such as those on an Arduino, to get the servo's position. That information can be used in robotics to improve stability or even allow 'recording' of servo motion.

    15,00 €
  13. Analog Feedback Micro Servo - Metal Gear

    It looks like a micro servo, it acts like a micro servo, but it's more than just a micro servo! Adafruit got a factory to custom-make these quality metal-geared 'micro' sized hobby servos with a twist - the feedback (potentiometer wiper) line is brought out to a fourth white wire. You can read this wire with an analog input such as those on an Arduino, to get the servo's position. That information can be used in robotics to improve stability or even allow 'recording' of servo motion.

    15,00 €
  14. G1/2 Electric Solenoid Valve (Normally Closed)

    This is a normally closed G1/2 12VDC electric solenoid valves with barbed inlet and outlet ports, great for projects involving low viscosity fluid control. You can find it ubiquitous on applications like automatic faucets, foot operated faucets, drinking fountains etc.

    10,00 €
  15. Intel® Edison Hardware Pack

    This is a Hardware Pack for the Intel® Edison, with this set you will be provided with increased mechanical strength for stacking Blocks. Each Hardware Pack includes ten M2x3mm standoffs, six M2x3mm screws, and six M2 nuts. With this set of hardware you will be able to secure three Blocks to one Intel® Edison. Eight standoffs and four screws and nuts are used for the Blocks, while two standoffs, screws, and nuts are used for the Intel® Edison itself.

  16. Pololu DRV8834 Stepper Motor Driver – Low-Voltage

    This is a breakout board for TI’s DRV8834 microstepping bipolar stepper motor driver. It has a pinout and interface that are nearly identical to those of our A4988 carriers, so it can be used as a drop-in replacement for those boards in many applications. The DRV8834 operates from 2.5–10.8 V, allowing stepper motors to be powered with voltages that are too low for other drivers, and can deliver up to approximately 1.5 A per phase continuously without a heat sink or forced air flow (up to 2 A peak). It features adjustable current limiting, overcurrent and overtemperature protection, and six microstep resolutions (down to 1/32-step). This board ships with 0.1″ male header pins included but not soldered in.

  17. Stepper Motor - NEMA-17 size - 200 steps/rev, 12V 350mA

    This 4-wire bipolar stepper has 1.8° per step for smooth motion and a nice holding torque. 12V/350 mA/35Ω

    15,90 €
  18. mBot v1.1 – Blue/Bluetooth

    An educational robot kit from Makeblock that is easy to build and use. This is the blue version of the mBot with a Bluetooth module. Batteries not included.

    109,00 €
  19. mBot v1.1 – Blue/2.4GHz

    An educational robot kit from Makeblock that is easy to build and use. This is the blue version of the mBot with a 2.4GHz wireless module. Batteries not included.

    115,00 €
  20. Starter Robot Kit – Bluetooth

    The Starter Robot kit from Makeblock is a great educational robotics kit that allows you to get into the world of robotics, electronics, and mechanics. The kit comes with various mechanical parts and electronic modules that you can use to build your own robot.

    149,00 €
Laskeva

   

Tuotteet 1-20 / 110

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5