0Item(s)

Ostoskorissasi ei ole yhtään tuotetta.

Product was successfully added to your shopping cart.

Servomoottorit

Laskeva

   

9 tuote(tta)

  1. Servo Motor - Large

    Here is a simple, low-cost, high quality servo for all your mechatronic needs. Large servo with a standard 3 pin power and control cable. Includes hardware as shown.

    11,00 €
  2. Micro Servo - Metal Gear (MG90S)

    Small micro servo with metal gears.
    10,00 €
  3. Analog Feedback Servo

    It looks like a servo, it acts like a servo, but it's more than just a servo! Adafruit got a factory to custom-make these classic 'standard' sized hobby servos with a twist - the feedback (potentiometer wiper) line is brought out to a fourth white wire. You can read this wire with an analog input such as those on an Arduino, to get the servo's position. That information can be used in robotics to improve stability or even allow 'recording' of servo motion.

    15,00 €
  4. Analog Feedback Micro Servo - Metal Gear

    It looks like a micro servo, it acts like a micro servo, but it's more than just a micro servo! Adafruit got a factory to custom-make these quality metal-geared 'micro' sized hobby servos with a twist - the feedback (potentiometer wiper) line is brought out to a fourth white wire. You can read this wire with an analog input such as those on an Arduino, to get the servo's position. That information can be used in robotics to improve stability or even allow 'recording' of servo motion.

    15,00 €
  5. Hitec HS-53 Servo Motor - Feather Size

    ‌The HS-53 is Hitec’s economical, feather servo designed to compete head to head with the influx of low cost servos while still maintaining Hitec’s renowned quality.

    9,50 €
  6. Continuous Rotation Servo - FeeTech FS5103R

    ‌This servo rotates fully forward or backwards instead of moving to a position. You can use any servo code, hardware or library to control these servos. Good for making simple moving robots. Comes with four different horns, as shown.
    18,00 €
  7. Standard servo - TowerPro SG-5010 - 5010

    ‌This high-torque standard servo can rotate approximately 180 degrees (90 in each direction). You can use any servo code, hardware or library to control these servos.

    15,00 €
  8. Servo - Hitec HS-422 (Standard Size)

    This high quality servo is perfect for your mechatronic needs and if you are looking to get into robotics, this is where to start.

    13,00 €
Laskeva

   

9 tuote(tta)