0Item(s)

Ostoskorissasi ei ole yhtään tuotetta.

Product was successfully added to your shopping cart.

Yleiset protoilutarvikkeet

Laskeva

   

5 tuote(tta)

  1. Intel® Edison Hardware Pack

    This is a Hardware Pack for the Intel® Edison, with this set you will be provided with increased mechanical strength for stacking Blocks. Each Hardware Pack includes ten M2x3mm standoffs, six M2x3mm screws, and six M2 nuts. With this set of hardware you will be able to secure three Blocks to one Intel® Edison. Eight standoffs and four screws and nuts are used for the Blocks, while two standoffs, screws, and nuts are used for the Intel® Edison itself.

  2. Maker Paste Lead-Free Prototyping Solder Paste

    ‌Lead-Free Prototyping Solder Paste from IC Breakout.

  3. Heat Shrink Kit

    This kit includes 95 pieces of heat shrink, all of varying colors and sizes. All pieces are 10cm in length.

  4. Arduino Project Enclosure

    The Arduino enclosure allows you to easily enclose your Arduino main board, Arduino Mega, or some of the other board that fits the Arduino foot print. It simply presses shut, so you don't have to worry about screws or fasteners.

    12,00 €
  5. BarePaint - Conductive Pen (10ml)

    Bare Paint is just like any other water-based paint... except that it's electrically conductive! This means that you can actually paint wires onto things like models, clothes, furniture, walls, almost anything you can think of. Standard acrylic or water-based paints can even be used alongside Bare Paint to act as insulation or to create multi-layer circuitry!

    10,00 €
Laskeva

   

5 tuote(tta)