Ostoskorissasi ei ole yhtään tuotetta.

Product was successfully added to your shopping cart.




12 tuote(tta)

  1. SparkFun Essential Sensor Kit

    Want to start playing with sensors, but don’t know where to begin? This kit includes a variety of basic sensors for any beginner or experienced programmer. With everything included in this kit, you’ll be able to sense acceleration, force, vibration, Infrared light, ambient light, temperature, and more! These are some great basic sensors from varying categories.
    44,00 €
  2. Adafruit 9-DOF IMU Breakout - L3GD20H + LSM303

    ‌‌This inertial-measurement-unit combines 2 of the best quality sensors available on the market to give you 9 axes of data: 3 axes of accelerometer data, 3 axes gyroscopic, and 3 axes magnetic (compass). 

    24,00 €
  3. VR IMU (Qwiic) - BNO080 High Precision

    ‌Breakout board for BNO080 IMU. Great for VR applications.

    59,00 €
  4. DIYDrones ArduIMU+ V3

    The ArduIMU+ V3 is the latest and greatest version of DIYDrones' smart IMU. This time they’ve made it smaller and faster by incorporating the new Invensense MPU-6000 MEMS 3-axis gyro and accelerometer as well the 3-axis I2C magnetometer HMC-5883L. With the GPS port and on-board Atmega328 microprocessor, the ArduIMU+ V3 is a tiny but powerful orientation solution.

    85,00 €
  5. ADXL335 - 5V ready triple-axis accelerometer (+-3g analog out)

    ADXL335 accelerometer breakout board from Adafruit. It has an on-board 3.3V regulator - making it a perfect choice for interfacing with a 5V microcontroller such as the Arduino. This breakout comes with 3 analog outputs for X, Y and Z axis measurements on a 0.75"x0.75" breakout board. The ADXL335 is the latest and greatest from Analog Devices, known for their exceptional quality MEMS devices. The VCC takes up to 5V in and regulates it to 3.3V with an output pin. The analog outputs are ratiometric: that means that 0g measurement output is always at half of the 3.3V output (1.65V), -3g is at 0v and 3g is at 3.3V with full scaling in between.

    15,00 €
  6. Triple Axis Accelerometer & Gyro Breakout - MPU-6050

    The MPU-6050 is a serious little piece of motion processing tech! By combining a 3-axis gyroscope and a 3-axis accelerometer on the same silicon die together with an onboard Digital Motion Processor™ (DMP™) capable of processing complex 9-axis MotionFusion algorithms, the MPU-6050 does away with the cross-axis alignment problems that can creep up on discrete parts.

    39,50 €
  7. LilyPad Accelerometer ADXL335

    This is a three axis accelerometer for the LilyPad system. Based on the ADXL335 accelerometer from Analog Devices, the LilyPad Accelerometer can detect joint movement as well as inclination and vibration.

    15,00 €
  8. Triple Axis Accelerometer Breakout - MMA8452Q

    This breakout board makes it easy to use the tiny MMA8452Q accelerometer in your project. The MMA8452Q is a smart low-power, three-axis, capacitive micro-machined accelerometer with 12 bits of resolution. This accelerometer is packed with embedded functions with flexible user programmable options, configurable to two interrupt pins. Embedded interrupt functions allow for overall power savings relieving the host processor from continuously polling data.

  9. Triple Axis Accelerometer Breakout - ADXL345

    The ADXL345 is a small, thin, low power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16 g. Digital output data is formatted as 16-bit twos complement and is accessible through either a SPI (3- or 4-wire) or I2C digital interface. 

    24,00 €
  10. Triple Axis Accelerometer Breakout - ADXL335

    3 axis accelerometer. +/-3g. Analog output.

    20,00 €
  11. Triple Axis Accelerometer Breakout - MMA7361

    3 axis accelerometer. Two selectable measuring ranges (±1.5g, ±6g). Analog output.

    12,00 €


12 tuote(tta)