0Item(s)

Ostoskorissasi ei ole yhtään tuotetta.

Product was successfully added to your shopping cart.

Langaton

Laskeva

   

Tuotteet 1-20 / 30

  1. 1
  2. 2
  1. Passive GPS Antenna uFL - 9mm x 9mm -2dBi gain

    ‌A GPS antenna for the FONA 808.

  2. Slim Sticker-type GSM/Cellular Quad-Band Antenna - 3dBi uFL

    ‌75mm long antenna with a 3 dBi gain. For 850/900/1800/1900/2100 bands.

  3. Adafruit HUZZAH32 – ESP32 Feather Board

    ‌Adafruit's ESP32-based Feather, made with the official WROOM32 module

    22,00 €
  4. Particle Photon with Headers

    ‌The Photon is a tiny Wi-Fi development kit for creating connected projects and products for the Internet of Things. It's easy to use, it's powerful, and it's connected to the cloud.‌

    25,00 €
  5. Sparkfun Fio v3 – ATmega32u4

    ‌Improved version of the Arduino Fio.

    39,00 €
  6. SparkFun nRF52832 Breakout

    ‌SparkFun’s nRF52832 Breakout provides easy access to all of the chip’s features. It breaks out all of the nRF52’s I/O pins, provides a 32.768kHz RTC crystal, a user-programmable button and LED, and a trace antenna to send and receive those 2.4GHz transmissions.

    24,00 €
  7. Adafruit Feather M0 Bluefruit LE

    ‌This is the Adafruit Feather M0 Bluefruit LE - Adafruit's take on an 'all-in-one' Arduino-compatible + Bluetooth Low Energy with built in USB and battery charging. Its an Adafruit Feather M0 with a BTLE module.

    35,00 €
  8. ESP8266 SMT Module - ESP-12E

    ‌The ESP8266 processor from Espressif is an 80 MHz microcontroller with a full WiFi front-end (both as client and access point) and TCP/IP stack with DNS support as well.

  9. Adafruit Feather 32u4 Bluefruit LE

    ‌This is the Adafruit Feather 32u4 Bluefruit - our take on an 'all-in-one' Arduino-compatible + Bluetooth Low Energy with built in USB and battery charging. Its an Adafruit Feather 32u4 with a BTLE module, ready to rock!

    35,00 €
  10. XBee 1mW Trace Antenna – Series 1

    Series 1 XBee module with trace antenna. We recommend to use this with the Arduino Fio.

    27,00 €
  11. XBee Explorer Dongle

    This is the XBee Explorer Dongle unit for the XBee line. With the XBee Explorer dongle you can now plug the unit directly into your USB port. No cables needed! This unit works with all XBee modules including the Series 1 and Series 2.5, standard and Pro version. The on-board voltage regulator is good up to 500mA.

    27,00 €
  12. Bluefruit LE - Bluetooth Low Energy (BLE 4.0) - nRF8001 Breakout

    Adafruit Bluefruit LE (Bluetooth Smart, Bluetooth Low Energy, Bluetooth 4.0) nRF8001 Breakout allows you to establish an easy to use wireless link between your Arduino and any compatible iOS or Android (4.3+) device. It works by simulating a UART device beneath the surface, sending ASCII data back and forth between the devices, letting you decide what data to send and what to do with it on either end of the connection.

    21,00 €
  13. RN-XV WiFly Module - Wire Antenna

    The RN-XV module by Roving Networks is a certified Wi-Fi solution especially designed for customer who want to migrate their existing 802.15.4 architecture to a standard TCP/IP based platform without having to redesign their existing hardware. In other words, if your project is set up for XBee and you want to move it to a standard WiFi network, you can drop this in the same socket without any other new hardware.

    36,00 €
  14. Bluetooth Modem - BlueSMiRF Silver

    The BlueSMiRF Silver is the latest Bluetooth****wireless serial cable replacement from SparkFun Electronics! This version of the popular BlueSMiRF uses the RN-42 module which has a bit less range than the RN-41 module used in the BlueSMiRF Gold.

    26,00 €
  15. XBee Shield

    XBee Shield for Arduino. Headers not included.

    17,00 €
  16. Electric Imp Breakout

    The Electric Imp Breakout Board allows you to explore the capabilities of the Imp by providing standard 0.1" headers to solder to as well as the necessaryCryptAuthEE IC to identify your prototype to the Imp Cloud service!

    19,50 €
  17. Electric Imp

    In essence, the Imp provides an easy, integrated way to connect almost any hardware device both to other devices and to internet services. It's more than just a WiFi card, or even a WiFi module with processing built in - it's an integrated platform that deals with the drudgery of connectivity, allowing you to concentrate on the application instead of the mechanics.

    30,00 €
Laskeva

   

Tuotteet 1-20 / 30

  1. 1
  2. 2